Продукти за g7sa 4a2b dc24 (16)

The T20 series with toothed output shafts and a rotation angle of 200-220 degrees is ideal for applications where torque generation and higher cycle rates are the most important requirements. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in three standard sizes with an output torque of up to 6,780 Nm at 210 bar. Operating pressure [bar]:207 Nominal torque [Nm]:5085 Holding torque [Nm]:10622 Swivelling angle [ degrees° ]:220 Momentkapazitat - Spreizmoment [Nm]:7628

Druckregelmodul mit integriertem Leistungsverstärker und optional automatischem Inbetriebnahmeassistenten

• According to DIN EN 61810-1, DIN EN 60664-1 • Different pin configurations and pin arrangements • Clearance and creepage distances: contact-coil ≥ 8 mm • Compact size, small height (horizontal model) • OA 5651, 5661 horizontal models • OA 5652, 5662, 5692 vertical models • Solder line proof Function:Printed circuit board relay Type of relay:monostabil Contact material:AgSnO2; AgNi Continuous current:8 A Nominal voltage UN DC:6 - 60 V Voltage Range UN:0,7 - 1,8 V Test voltage (AC) contact set - coil:≥ 4 kV eff Clearance and creepage distances, contact set - coil ≥:8 mm Temperature range (- / +):40 - 80 °C Protection type:RT II (flux-proof relay) Size L x W x H:28 x 25 x 10,8 mm Approvals:cRUus Relay type:OA 5661

24VDC / 5VDC 10A

CT-222F 16 channel digital output/24VDC/source type/output 24VDC, the output high level is valid Module features the module supports 16 channels digital output, the output high level is valid, the output voltage is 24VDC. module can drive field equipment. (relay, solenoid valve, etc.) the internal bus of the module and field output are using opto-coupler. the module has 16 digital output channel LED indicator light. the module has the functions of thermal shutdown and overcurrent protection. the module supports short circuit protection and overload protection. Wiring:Max.1.5mm²(AWG 16) Mounting Type:35mm Size DIN-Rail Size:115*51.5*75mm Weight:65g Operation Temperature:-40~85 Protection Class:IP20 Operational Humidity:5%~95% RH(No Condensation) Product Model:CT-222F

CANopen Integrierter 1Q Regler Integrierte Leistungselektronik DC Permanentmagnetmotor Absolute Positionserfassung (multiturn) Lebensdauer: 2.000 h Isolierstoffklasse: B, optional F Schutzart: IP 42, optional bis IP 65 Umgebungstemperatur: -15°...40°C

Das neue low kost Sensormodul Steuergerät für alle AF*-Füllsicherungsüberwachung von Wannen, Schächten und Tanks im Ex-Bereich. Das DIN-Schienen-Gehäuse eignet sich im Schaltanlagenbau. Spannungsversorgung 24 VDC ±10 % 2.5VA Anschluss für 1 Fühler, eigensicherer Ausgang Selbstüberwachung nach NAMUR EN107 RGB-LED Fehlerstatusanzeige Fühlermesswertüberwachung und Wartungserinnerung Relaisausgang mit 2 pot.-freien Umschaltkontakten Funktionstaste Gerätealarmtest Netz-Funktionsanzeige mit LED Gehäuse IP 20 ohne Sockel, Dim. HxBxT 118x25x118 mm, Gewicht 0.160 kg Ex-Ausführung SEV 21 ATEX 0523; Ex II (1) G [Ex ia Ga] IIC; CE; Gewässerschutztauglichkeit nach KVU Zu Sensoren: AF-/LS-Serie

90 V AC bis 265 V AC, Weitbereichsnetzteil, 4 A, geeignet für alle AS-i Gateways und Sicherheitsmonitore von Bihl+Wiedemann.

PGR Drive Technologies provide solutions in planet gear units with PTO, IEC, parallel shaft input options which offer high reduction ratio in small volumes in drive systems with heavy and variable loads thanks to their compact and modular structure up to 850000 Nm of moment values.

Axial-Querstromgebläse Noch bessere Anlagerung - weniger Abdrift und Spritzmittelverlust durch gezielte Luftführung. Daher umweltfreundlicher und effektiver. Top-Serienausrüstung - mech. Bedieneinheit mit Bowdenzügen - Saugfilter mit Absperrautomatik - Druckfilter mit Schnellreinigung - Behälterfüllstandsanzeige - Hydr. Rührwerk - Spülbehälter zur Systemreinigung - Handwaschbehälter 15 l - Behälterauslaufhahn - Gebläse abschaltbar - Myers-Einzeldüsen mit Tropf-Stop schwenk- und abstellbar (außerhalb vom Luftstrom). Düseneinsätze Albuz gelb - Teleskop Gelenkwelle Walterscheid - Einseitige Abdeckung zu D 36A - für hohe Kulturen Zusatzausrüstung - Myers-Doppel- und Dreifachdüse - Düseneinsätze nach Wahl - Magnetventile Einsatzbereich - Reihenabstand: 1,6 bis 8,0 Meter - Kultur-Höhe: bis 12,0 Meter

Caratteristica — Motori CC a magnete permanente — Spazzole in grafite e rame — Carcassa del motore zincata — Cuscinetti a sfera — Fori di montaggio secondo le norme DIN 42016 Dati generali — Durata appros.: 3000 h — Carico max sullalbero: assiale 40 N — Carico max sullalbero: radiale 100 N — Classe d'isolamento: DIN VDE 0530, E — Classe di protezione: DIN VDE 0530, IP 40 — Soppressione RFI: fattibile AC/DC:DC Tipo:sincrono Tensione:10 V...50 V,5V Altre caratteristiche:a magneti permanenti

LED Outdoor Laufschrift mit einer Auflösung von 32*224 Pixel bei einem Pixelpitch von 10mm. Die Ansteuerung erfolgt per Software via Ethernet-Schnittstelle. Anwendungsbereich:outdoor Schrifthöhe:4-zeilig: 65mm // 2-zeilig: 160mm // 1-zeilig: 310mm LED Farbe:Blau Ansteuerung:Ethernet

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted. Specific torque [Nm/bar]:32,80 Operating pressure [bar]:280 Nominal torque [Nm]:9184 Swivelling angle [ degrees° ]:120

• According to DIN EN 61810-1, DIN EN 60664-1 • Low rated power consumption • 2 changeover contacts • Clearance and creepage distances: contact - coil ≥ 8 mm • Adjustment to customers specification • Compact size, small height (at horizontal model) • OA 5661.12 horizontal mounting • OA 5662.12 vertical mounting • Solder line proof Function:Printed circuit board relay Type of relay:monostabil Contact material:AgSnO2; AgNi Continuous current:6 A Nominal voltage UN DC:6 - 60 V Voltage Range UN:0,7 - 1,4 V Test voltage (AC) contact set - coil:≥ 4 kV eff Clearance and creepage distances, contact set - coil ≥:8 mm Temperature range (- / +):40 - 70 °C Protection type:RT II (flux-proof relay) Size L x W x H:37 x 25 x 10,8 mm Approvals:cRUus Relay type:OA 5661.12

• According to DIN EN 61810-1, DIN EN 61810-3 • With forcibly guided contacts • High switching safety because of gold plated double contacts • Clearance and creepage distances: contact - contact ≥ 5,5 mm • Low rated power consumption and holding power • High mechancial service life • High temperature range • High thermal continuous current • Voltage range 0.75 ... 1.2 UN • 15.5 mm height Function:Safety relays with double contacts Type of relay:monostabil Contact material:AgNi + 5 µm Au Continuous current:5 A Nominal voltage UN DC:6 - 110 V Voltage Range UN:0,75 - 1,2 V Test voltage (AC) contact set - coil:≥ 4 kV eff Clearance and creepage distances, contact set - coil ≥:5,5 mm Temperature range (- / +):40 - 80 °C Protection type:RT III (wash-tight) Size L x W x H:46,5 x 22 x 15,5 mm Approvals:TÜV; cRUus Relay type:OA 5621_D

PGR Drive Technologies fournissent des solutions dans les réducteurs planétaires avec options de prise de force, IEC, entrée à arbres parallèles qui offrent un rapport de réduction élevé dans de petits volumes dans des systèmes d'entraînement avec des charges lourdes et variables grâce à leur structure compacte et modulaire jusqu'à 850000 Nm de valeurs de moment.